Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker

Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker
Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area from SparkMaker (click images to enlarge)
$229.00
- stock arriving soon
Product prices and availability are accurate as of 2024-04-26 13:19:58 BST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
pinterest

Description of Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin...

Top 3D Electronics bestsellers are delighted to stock the brilliant Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area.

With so many on offer today, it is great to have a brand you can trust. The Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area is certainly that and will be a great buy.

For this reduced price, the Sparkmaker High-Resolution 3D Printer, Mini Desktop Resin SLA Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area comes highly respected and is always a regular choice with most people. SparkMaker have provided some excellent touches and this means good value for money.

Manufacturer Description

How to use Sparkmaker:
Step1:Add model to SparkStudio to add support and slice
Step2:Save the slice file to SD card.
Step3:Level platform when first print (No need to level again next time).
Step4:Loosen the four screws on both sides of the platform.
Step5:Rotate the knob drops the platform to the lowest point
Step6:Press down the platform and tighten the four screws on both sides of the platform.
Step7:Pour the resin into resin tank(Less than 120g resin)
Step8:Insert the SD card into the slot (Face down).
Step9:Press the button and start to print 
Step10:The print is finished.
Step11:Loosen the handle and remove the platform
Step12:Remove the supports of model
Step13:Clean the model with 99% alcohol
Step14:Irradiate the model with UV-light about 2-3mins.（purchased separately）
Step15:Finally,get the model.

How to Clean the Machine?
The edge of the building platform can be cleaned using tissue or dust cloth and residual adhesive can be removed with a knife or spade and the residual adhesive in the tank should be removed with tweezers. The remaining resin can be absorbed using a syringe and stored in a bottle for next use. Loosen the two screws used to install resin tank and clean the tank with alcohol, and then reinstall it.

Matters needing attention:
1.※When connecting the printer,You should plug in the DC port first,and then plug in the socket.
2.The SparkMaker 3D Printer should put in a place without strong light.
3.UV cover should be put on the SparkMaker Printer when printing.
4.The SD card's capacity should not more than 32G and should be formatting when first use.
5.Avoid looking at UV light and you should wear goggles.

KINDLY REFER USER MANUAL BEFORE USE.

Product Features

DESKTOP DESIGN: Only 6.6 pounds with a compact size of 170φ*275mm, Featuring a small footprint. Suitable for office, studio or home. READY TO PRINT: Unlike most other 3D printers, fully assembled and has already been calibrated at the factory. You can start printing right out of the box! OFFLINE PRINTING: Insert an SD card with a print file, press the print button and your design begins to take shape. Without connection problems. Easy to print. Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers. WORRY-FREE WARRANTY: Unconditional return, if you have any question please feel free to contact us, we will reply your any product issue within 24 hours.

Browse Categories